Spooky Stick Wreath
/Years ago, I saved an image of a spooky wreath made from sticks. Last year I came across it again and decided it was high-time I make my own. Here is the inspiration image…
From Earnest Home Co via Pinterest.
All said and done, this was a really simple project that I made over the course of an afternoon. I’m really happy with how it turned out! I haven’t put it up quite yet, but I wanted to share it for anyone who wants to make their own in preparation for the spooky season ahead.
Spooky Stick Wreath
Supplies
Sticks, in varying sizes, see step 1 below
Glue gun and extra glue sticks
Cardboard or kraft paper (to work on)
Sharpie or other black marker
Black spray paint
Ribbon or a wreath hanger
Directions
First, collect sticks to use for your wreath. In general, I recommend thinner sticks. I think they add to the aesthetic better than a big, thick stick would. Our yard is full of sticks on any given day, so I spent a little time wandering around to pick up a few armfuls. I found it was helpful to get a bunch and then I sorted them later.
Second, sort your sticks. I put them into 3 piles—short, medium, and long. Each size range is a bit arbitrary, but it was helpful to start with the longer sticks, then add in medium sticks, then add the final touches with the smallest sticks as I was gluing. I also broke some sticks to better fit into my three categories and make them all a bit more uniform. I chose to use individual sticks, not branches, for my wreath.
Third, lay out a big piece of cardboard or kraft paper, grab a sharpie or other black marker, and get your glue gun ready. I chose to do my project outside on our big patio table, but you could definitely do this inside at your dining room table. You just need somewhere you can spread out a bit to work and that you don’t mind if it gets some dirt/mess on it.
Fourth, draw a circle on your cardboard to use as a guide for your wreath. I chose a circle that is about 14” in diameter. Then, lay out an initial layer of sticks to get your wreath started and your circle size set. I started with the longest sticks for the base of my wreath. Using your hot glue gun, glue sticks together where they touch. Continue to add sticks until you get to the size and fullness you desire for your wreath.
Fifth, once you’ve got your wreath glued, you’re ready to paint! I took a minute to remove lingering strings from the glue gun, and then gave it a light first coat of glossy black spray paint. I let that dry while I did a few other things, came back and gave it another coat to make sure I had covered all the nooks and crannies. Once you’ve gotten coverage you are happy with, set it aside to dry. I let mine sit overnight.
Sixth, using a ribbon or a wreath hanger, put your new Spooky Stick Wreath on display! I used mine in our dining room, but I also think it would be super fun on our front door.
Cheers to fall nights and spooky vibes!
